AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Pressed concrete tiles1/18/2024 ![]() ![]() The MOSAIC factory tile is more resistant to abrasion than marble.Įxample of length of the mark left by the standard abrasive disc: 17 mm Granit - 19 mm Ceramics - 20-22 mm MOSAIC factory cement tiles - 27 mm Marble, travertine - 31 mm Slate. Result: Length of the abrasive mark: 22,5 and 19,3 mm LOEMCO Laboratory, Spain 2021, UNE standard 41901:2017Ĭlass 3 according to UNE standards = adapted to humid indoor áreas, terraces, changing rooms, shower rooms, bathrooms stairs or slopes >6ºĪIDICO Laboratory, Spain, 2011, UNE-EN 13748-1 :05 Result: average angle12,2º, Classification R10 according to German standards, DIN = suitable for interior floors in indoor public areas, public toilets, toilets, schools and children’s playgrounds, operating theatres, corridors, stairs and food processing areas. The process of turning this special Mexican clay into tiles has remained unchanged since 1577. Hand-crafted from natural clay deposits, authentic Saltillo tile can only come from one place in the world: Saltillo, in the state of Coahuila in Mexico. IFA Laboratory, Germany, 2020, DIN 51130 (02.2014) & ASR A1.5/1,2 used in manufacturing slabs and environmental products in both cast concrete with delayed unmoulding and pressed concrete with immediate unmoulding. Saltillo tile pavers look great with Spanish-style homes. Tiles are protected with foam dividers and packaged in 21x21x27 cm cardboard boxes containing 15 tiles and weighing 20 kilos. The weight of the packaging, pallets and protection should be added for transport. Weight and packaging: Each tile of 20x20cm (16 mm thickness) weighs 1,35 kg, thus a total of 35 kilos/m2. Thickness difference of one tile: +/- 0,5 mmĪverage thickness of the pigmented layer 4mm: +/- 1 mmįlatness of the surface: Maximum deflection -0,2 mm 3D & Relief tile, Secoin encaustic cement tile is made of 100 environmentially friendly materials, consume no fuel thanks to non-burnt production. LAENZA laboratories, 2007 AIDICO laboratory, 2011ĭifference between the 4 sides of one same tile: +/- 0,2 mm The laboratory tests we refer to on this page were realised (in the absence of “cement tile” standards), based on the test protocols for terrazzo or cement and concrete slabbing. Under the pressure of a hydraulic press excess water is pushed out and the tiles. The hardening, maturing and drying process of cement is made naturally by air, gradually over time, without the use of ovens.Īpplicable standards: Cement tiles are not part of, nor regulated by European (CE) or national standards. After the colour layer, cement and sand is added until the mould is full. These components are mixed, moulded and then pressed. Composition and production: Cement tiles are composed of grey or white Portland cement, marble powder, sand, cement pigments, and water. ![]()
0 Comments
Read More
Leave a Reply. |